ThreadMaster ONE

Nouveau produit

ThreadMaster ONE
ONE-Part Premium Wrap Finish

Plus de détails

En achetant ce produit vous pouvez gagner jusqu'à 8 points de fidélité. Votre panier totalisera 8 points de fidélité pouvant être transformé(s) en un bon de réduction de $1.60.


$6.10

Ajouter à ma liste de cadeaux

Shipping Rates

En savoir plus

ThreadMaster ONE
ONE-Part Premium Wrap Finish

• Non-Yellowing UV Inhibitors
• Tougher than Standard Epoxy
• More Flexible
• Water Cleanup

Application Instructions:

THREADMASTER One a water based finish, is different than standard 2 part epoxy finishes.

DO NOT USE FLAME IT HAS NO EFFECT

  • There is no mixing of this product use it straight out of the bottle
  • DO NOT SHAKE OR STIR
  • Since this a new product, initial observations showed negligible thread color change after application
  • Needs to be applied in temperatures above 67 degrees, temperatures any less greatly increase dry times.  The warmer the better
  • Adequate buildup can be achieved in 2 coats but definitely in 3 coats
  • This is not a CP so use CP if necessary for your particular application
  • Can be applied the same way you currently apply your 2 part epoxy
  • This is water based when it is applied as the finish dries it will shrink a bit from the original application 
  • I recommend the first coat should just get the thread soaked, no buildup at all, this will help with any bubbles that might occur with putting on a thicker coat.  Wick off any extra.  If CP is used this step can be skipped
  • Turn on a rod dryer, allow at least 3 hours between coats depending on the temperature
  • The 2nd coat can be applied much thicker, because of the shrinkage apply just a bit more than you would normaily 
  • If bubbles appear the only way to remove them is to either blow them out with a thinstraw or use a toothpick or something similar to poke them out.  FLAME WILL NOT WORK! 
  • Allow at least 72 hours for full cure, in cooler temperatures allow longer time

Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

ThreadMaster ONE

ThreadMaster ONE

ThreadMaster ONE
ONE-Part Premium Wrap Finish

Les clients qui ont acheté ce produit ont également acheté...

30 autres produits dans la même catégorie :